Installation

Product overview 

UcamX is Ucamco’s newest pre-production engineering solution for the electronics manufacturing industry. It is the successor of Ucam. It is developed to provide PCB manufacturing with zero-defect tooling. UcamX can accept a wide variety of PCB data as well as generate all data and process information for your production equipment. 

Product Description
UcamX CAM ++

UcamX CAM++ offers integrated planning, tooling, and testing and optical inspection functions. 

UcamX captures layout data, netlist information, customer specifications, mechanical drawings and manufacturing details in a single job database. 

UcamX CAM++ also offers security tools such as Netlist Compare, Netlist Analysis and Image Compare. 

UcamX AF+ UcamX AF+ (AutoFixture) offers a solution for the design of universal fixtures. It calculates the most cost-effective fixture and allows you to split between universal grid and flying probe. 
UcamX ET+ UcamX ET+ is an open electrical test CAM system that offers above-market standards test point generation and the most complete IPCD356A output. It also provides links to (any combinations of) flying probe, flying grid, universal and dedicated fixture testers. 

 

 

 

 

 

 

 

 

Requirements

UcamX is available for download via our FTP-site ftp.ucamco.com. The following platforms and operating systems are supported: 

  • Windows 11 
    UcamX is working on Windows 8 / 10 too but we no longer fix issues that are specific to that OS
  • Linux 
    UcamX is working on specific Linux Distros but we no longer fix issues that are specific to that OS.
    For details please contact us on info@ucamco.com

Note: The PC that you provide to run UcamX should be dedicated to the use of UcamX only. We strongly advise you to use a PC configuration from a brand name supplier (Intel based). 

Specific requirements for each configuration are discussed below. 

Windows

The following are the requirements for installing and running UcamX on a Windows system. 

Features Minimum Recommended
O/S Windows 10 - 64bit  
Processor Intel i5 or AMD RYZEN 5 Intel i7-i9 or AMD Ryzen 7-9 (and intel XEON, AMD RYZEN PRO)
RAM memory 8 GB 8+ GB
Disk type Mechanical SSD
Display Full HD Full HD or more
Network card Ethernet network card for TCP/IP network environment   
Internet browser (1) Mozilla Firefox or Google Chrome  

 

 

 

 

 

 

 

 

(1) A browser is needed to display the Online Help. 

Tip: All current CPU’s are 64bit. To get the maximum performance from UcamX it is strongly recommended to install a 64bit operating system. 

Parallel Processing (PP+)

The following are the requirements for installing and running UcamX with parallel processing capabilities on a Windows system. These are additional requirements on top of single core UcamX version. 

Features Minimum Recommended
O/S Windows 10 - 64bit  
Processor 4 cores CPU, it could be only virtual with the hyperthreading enabled  Intel Core i7 or better 
RAM memory 8 GB 16 GB (4 GB per PP)

 

 

 

 

Linux

UcamX is working on specific Linux Distros but we no longer fix issues that are specific to that OS. For details please contact us on info@ucamco.com

Request test license